Quality management

Works like MasterControl, ETQ or Minitab. Run a plant's quality desk: inspect incoming lots to the sampling plan and catch the gauge past calibration, find the run rule on a control chart and work out Cpk, open the NCR, write a CAPA to the real root cause and find the station on an old SOP revision.

Quality

Halden Precision Parts · November 2, 20260 of 5 done right

QuickCruit Quality

Inspection lots

Riverside plant receiving dock · 4 lots · origin: goods receipt

Part	Supplier	Lot size	Sample	Received	Inspector	Status
8009-951 Bearing sleeve	Ostler Manufacturing	64	13	Oct 31, 2026	Felix Bell	To inspect
8009-951 Bearing sleeve	Tamsin Components	275	32	Nov 2, 2026	Felix Bell	To inspect
8009-951 Bearing sleeve	Harlan Precision	446	50	Oct 30, 2026	Rosa Okafor	To inspect
8009-951 Bearing sleeve	Tamsin Components	63	13	Nov 1, 2026	Rosa Okafor	To inspect

Halden Precision Parts

November 2, 2026

Open items, qualitySam Delacroix, quality manager

Open items before the floor meeting:Receiving: 4 lots in with sample readings. Judge each one by the sampling plan, and check what it was measured with before you trust a number.SPC: CNC-7's chart has been acting up the last few shifts. I need the rule it broke and when it began, and Cpk while you're in there.NCR: whatever fails at receiving gets one, done by the procedure.CAPA: CAPA-0639 has the operator's notes on CNC-7. Root cause, not the symptom.Floor: someone is working from an old revision. Find them.

Halden Precision Parts and its Riverside plant are made up, and so are its people, parts, suppliers and numbers. A practice scenario, built for you.